Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/103377
Título: | Quantification of Residual Stress Relief by Heat Treatments in Austenitic Cladded Layers | Autor: | Rebelo Kornmeier, Joana Marques, Maria José Gan, Weimin Batista, António Castanhola Paddea, Sanjooram Loureiro, Altino |
Palavras-chave: | residual stresses; neutron diffraction; contour method; stainless steel cladding; heat treatment | Data: | 12-Fev-2022 | Projeto: | UID/EMS/00285/2020 | Título da revista, periódico, livro ou evento: | Materials | Volume: | 15 | Número: | 4 | Resumo: | The effect of the heat treatment on the residual stresses of welded cladded steel samples is analyzed in this study. The residual stresses across the plate's square sections were determined using complementary methods; applying diffraction with neutron radiation and mechanically using the contour method. The analysis of the large coarse grain austenitic cladded layers, at the feasibility limits of diffraction methods, was only made possible by applying both methods. The samples are composed of steel plates, coated on one of the faces with stainless steel filler metals, this coating process, usually known as cladding, was carried out by submerged arc welding. After cladding, the samples were submitted to two different heat treatments with dissimilar parameters: one at a temperature of 620 °C maintained for 1 h and, the second at 540 °C, for ten hours. There was some difference in residual stresses measured by the two techniques along the surface of the coating in the as-welded state, although they are similar at the welding interface and in the heat-affected zone. The results also show that there is a residual stress relaxation for both heat-treated samples. The heat treatment carried out at a higher temperature showed sometimes more than 50% reduction in the initial residual stress values and has the advantage of being less time consuming, giving it an industrial advantage and making it more viable economically. | URI: | https://hdl.handle.net/10316/103377 | ISSN: | 1996-1944 | DOI: | 10.3390/ma15041364 | Direitos: | openAccess |
Aparece nas coleções: | I&D CEMMPRE - Artigos em Revistas Internacionais FCTUC Física - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Quantification-of-Residual-Stress-Relief-by-Heat-Treatments-in-Austenitic-Cladded-LayersMaterials.pdf | 13.34 MB | Adobe PDF | Ver/Abrir |
Citações SCOPUSTM
4
Visto em 21/out/2024
Citações WEB OF SCIENCETM
4
Visto em 2/out/2024
Visualizações de página
101
Visto em 22/out/2024
Downloads
91
Visto em 22/out/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons