Utilize este identificador para referenciar este registo:
https://hdl.handle.net/10316/106364
Título: | Nugget Formation and Mechanical Behaviour of Friction Stir Welds of Three Dissimilar Aluminum Alloys | Autor: | Manuel, Neves Galvão, Ivan Leal, Rui M. Costa, José D. Loureiro, Altino |
Palavras-chave: | friction stir welding; three dissimilar aluminum alloys; welding speed; T-joints; microstructure; mechanical properties | Data: | 11-Jun-2020 | Editora: | MDPI | Projeto: | UIDB/00285/2020 Ministério das Pescas from Angola through a fellowship |
Título da revista, periódico, livro ou evento: | Materials | Volume: | 13 | Número: | 11 | Resumo: | The aim of this research was to investigate the influence of the properties of the base materials and welding speed on the morphology and mechanical behavior of the friction stir welds of three dissimilar aluminum alloys in a T-joint configuration. The base materials were the AA2017-T4, AA5083-H111, and AA6082-T6 alloys in 3 mm-thick sheets. The AA6082-T6 alloy was the stringer, and the other alloys were located either on the advancing or retreating sides of the skin. All the T-joint welds were produced with a constant tool rotation speed but with different welding speeds. The microstructures of the welds were analyzed using optical microscopy, scanning electron microscopy with energy dispersive spectroscopy, and the electron backscatter diffraction technique. The mechanical properties were assessed according to micro-hardness, tensile, and fatigue testing. Good quality welds of the three dissimilar aluminum alloys could be achieved with friction stir welding, but a high ratio between the tool's rotational and traverse speeds was required. The welding speed influenced the weld morphology and fatigue strength. The positioning of the skin materials influenced the nugget morphology and the mechanical behavior of the joints. The joints in which the AA2017 alloy was positioned on the advancing side presented the best tensile properties and fatigue strength. | URI: | https://hdl.handle.net/10316/106364 | ISSN: | 1996-1944 | DOI: | 10.3390/ma13112664 | Direitos: | openAccess |
Aparece nas coleções: | I&D CEMMPRE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Nugget-formation-and-mechanical-behaviour-of-friction-stirwelds-of-three-dissimilar-aluminum-alloysMaterials.pdf | 5.95 MB | Adobe PDF | Ver/Abrir |
Citações WEB OF SCIENCETM
6
Visto em 2/mai/2023
Visualizações de página
80
Visto em 23/out/2024
Downloads
45
Visto em 23/out/2024
Google ScholarTM
Verificar
Altmetric
Altmetric
Este registo está protegido por Licença Creative Commons